Home > News > Content

High Pole With Hot Galvanized And Sprayed



High pole lamp is the use of a wide range of products, and in many cases it can meet our needs, high pole lights have several specifications?

The first feature of the high pole lamp is that the height can be set according to the need, such as height ranging from 20m-30m, poles with polygons, usually 8 sides / 12 sides / 16 sides, and the pull rod plug structure.

One of the common 20m, 25m, 30m height of the product in the light pole on the caliber, the lower diameter, light pole section, the upper wall thickness, the next section of the wall thickness is different, High-pole Lamp according to the specific needs of the design, different height needs With different caliber, and in the high pole of the poles are basically hot galvanized with spray treatment.

For the special product type light pole can be stainless steel rod or high quality steel plate, molded into a multi-Ling cone-shaped plug-in steel bar, light box by hot galvanized anti-corrosion treatment, light plate skeleton made of high quality stainless steel, fastener bolt , High-pole Lamp Nuts for stainless steel and so on.

We often in the city square, station, port, airport, car park, stadium, overpass and other places to see the high pole of the figure, while the unique style of each place.

High pole lights generally refers to more than 15 meters steel conical poles and high-power combination of lighthouse constitute a new type of lighting device, High-pole Lamp which consists of the lamp, the internal lighting electrical, rod and the basic part of the combination.

High pole lights are used for roads, roads and other places, its handsome in appearance, should have a strong decorative. Light pole is much higher than the street lamp, High-pole Lamp lighting area is also larger. At the same time lighting effect is good, light source concentration, uniform light, glare small.

Light plate using electric lift, easy to operate, the lamp rose to the working position, the lamp can automatically off, hook, wire rope unloading. In addition lighting control points are hand control, light control, time control and microcomputer control, easy to control, maintenance.

High pole lights installed

Lamp shape can be based on user requirements, the surrounding environment, High-pole Lamp the need to specifically determine the lighting, the internal lighting by the high-power LED flood light and cast light composition. The rod body is generally pyramid-shaped structure, made of steel plate rolling, height of 15-40 meters, mostly two to three sections, the irradiation radius of up to 40-80m.

High pole configuration

1. Light pole for the octagonal, twelve edge, eighteen pyramidal rod body, from high-strength high-quality steel plate by the cut, bending, automatic welding forming, High-pole Lamp design maximum wind resistance up to 60 m / s. Each specification consists of 3 to 4 plugs, with flange steel chassis, diameter 1 m to 1.2 m, thickness 30 mm to 40 mm.

2. Functional to the framework of the main structure, but also to the main decorative materials to steel, steel-based, light pole, light plate with hot dip zinc treatment.

3. Electric lift system consists of electric motor, hoist, three sets of hot-dip galvanized steel wire rope and cable and other components. Light pole installed in the body, lifting speed of 3 to 5 meters per minute.

4. The guide and unloading system consists of guide wheels and guide arms to ensure that the lamp plate does not move horizontally during the lifting process. High-pole Lamp When the lamp is raised in place, the lamp panel can be automatically disengaged and locked by the hook.

5. The lighting system consists of high power LED flood light, LED flood light, computer time control can automatically control the switch light time and part of the lighting or full lighting.

6. Lightning protection system: the roof of the installation of 1.5 meters long lightning rod, High-pole Lamp the basement installed a 1 meter long ground wire and welding with the anchor bolts.


Product Catalog
Contact Us

Email: aaron89@sina.com


Zip/Post Code:225651

Tel:86-514-84216369

        86-13773313810

Fax:86-514-84212540